bopp heat sealable film
June 23, 2021
Single-side heat sealable film
1.Application:
Widely used in food & confectionary packaging etc.
Thickness:20μm、25μm、30μm
Features:
Ø General grade
Ø Transparent, one side heat sealable
Ø One side corona treatment, normal sealing temperature
Ø Low static, excellent flatness, good heat seal strength
Typical Values：
| Properties | Test Method | Unit | Typical value | ||||
| Thickness | Kinlead | μm | 18 | 20 | 25 | 30 | |
| Thickness Variation | Astm-252-78 | % | ±3.0 | ±3.0 | ±2.5 | ±2.5 | |
| Yield | Kinlead | m2/kg | 61.1 | 54.9 | 44.0 | 36.6 | |
| Tensile strength | MD | Astm D-882 | Mpa | 140 | 140 | 140 | 140 |
| TD | Astm D-882 | Mpa | 280 | 280 | 280 | 280 | |
| Elongation At Break | MD | Astm D-882 | % | 175 | 175 | 175 | 175 |
| TD | Astm D-882 | % | 65 | 65 | 65 | 65 | |
| Friction Coefficient | T/T-US | Astm D-1894 | - | 0.30 | 0.30 | 0.30 | 0.30 |
| T/O-US | Astm D-1894 | - | 0.40 | 0.40 | 0.40 | 0.40 | |
| Heat Shrinkage | MD | Astm D-1204 | % | 4.0 | 4.0 | 4.0 | 4.0 |
| TD | Astm D-1204 | % | 1.5 | 1.5 | 1.5 | 1.5 | |
| Haze | Astm D-1003 | % | 1.2 | 1.5 | 1.7 | 2.0 | |
| Sealing Strength | Kinlead | N/15mm | 3.0 | 3.0 | 3.0 | 3.0 | |
| Sealing Temperature | Kinlead | ℃ | 115 | 115 | 115 | 115 | |
| Gloss | Astm D-2457 | - | 92 | 92 | 92 | 92 | |
| Wetting Tension | Astm D-2578 | Dyn | 38 | 38 | 38 | 38 | |
The above values of the properties obtained in our laboratory test. These values are for informative purpose and not in guarantee or warranty in any specific condition. Users are advised to conduct their own testing to determine product suitability to use.
Double-side heat sealable film
Application:
Widely used in food & confectionary packaging ect.
Features:
Ø General grade
Ø Transparent, both side heat sealable
Ø One side corona treatment, normal sealing temperature
Ø Low static, excellent flatness, good heat seal strength
Thickness:20μm、25μm、30μm、40μm、50μm
Typical Values：
| Properties | Test Method | Unit | Typical value | |||||
| Thickness | Kinlead | μm | 20 | 25 | 30 | 40 | 50 | |
| Thickness Variation | Astm-252-78 | % | ±3.0 | ±2.5 | ±2.5 | ±2.5 | ±2.0 | |
| Yield | Kinlead | m2/kg | 54.9 | 43.9 | 36.6 | 27.5 | 22.0 | |
| Tensile strength | MD | Astm D-882 | Mpa | 140 | 140 | 140 | 140 | 135 |
| TD | Astm D-882 | Mpa | 280 | 280 | 280 | 290 | 285 | |
| Elongation At Break | MD | Astm D-882 | % | 175 | 175 | 175 | 175 | 175 |
| TD | Astm D-882 | % | 65 | 65 | 65 | 65 | 65 | |
| Friction Coefficient | T/T-US | Astm D-1894 | - | 0.3 | 0.3 | 0.3 | 0.3 | 0.3 |
| T/O-US | Astm D-1894 | - | 0.4 | 0.4 | 0.4 | 0.4 | 0.4 | |
| Heat Shrinkage | MD | Astm D-1204 | % | 4.0 | 4.0 | 4.0 | 4.0 | 4.0 |
| TD | Astm D-1204 | % | 1.5 | 1.5 | 1.5 | 1.5 | 1.5 | |
| Haze | Astm D-1003 | % | 1.5 | 1.7 | 2.0 | 2.0 | 2.2 | |
| Sealing Strength | Kinlead | N/15mm | 3.0 | 3.0 | 3.0 | 3.0 | 3.0 | |
| Sealing Temperature | Kinlead | ℃ | 115 | 115 | 115 | 115 | 115 | |
| Gloss | Astm D-2457 | - | 92 | 92 | 92 | 85 | 85 | |
| Wetting Tension | Astm D-2578 | Dyn | 38 | 38 | 38 | 38 | 38 | |
The above values of the properties obtained in our laboratory test. These values are for informative purpose and not in guarantee or warranty in any specific condition.
Users are advised to conduct their own testing to determine product suitability to use.
If you want buy clear film or laminated film from china,just conatct me ,promise will do not waste your treasure time and price do not let you down,but do well and long term of business:
my whatsapp:008615063431351
wechat:yuanyuan20140707
mail:wfwhexporting@gmail.com